the advatages of FOF- Solid corrosion and scale inhibitor Compared with silicon phosphorus crystal

the water treatment products FOF- Solid corrosion and scale inhibitor.

1. Low solubility, long-term immersion saturation concentration below 2.5ppm

2. Effective concentration 0.2ppm-2.5ppm

3. The scale inhibition rate is high, the scale inhibition rate is higher than 85% in the effective concentration range, and above 95%, it can reach more than 95%.

silicon phosphorus crystal

1. High solubility, soaking for a long time will be powdered, or even all become white water.

2. Effective concentration 3-5ppm

3. The scale inhibition rate is low, and it can reach 80% or more in the range of 3-5ppm, but at other concentrations

The scale inhibition rate is less than 80%, and when the concentration is too high, scale generation is also aggravated.

As the soaking time is extended, the amount of silicon-phosphorus crystals continues to increase, reaching 10 days.

734ppm, and after FOF soak for 30 days, the phosphorus content is only 2.1ppm, which is silicon phosphorus crystal

The amount of precipitation is 2.86‰

The working temperature has an obvious effect on the scale inhibition rate of silicon-phosphorus crystal. The optimum temperature for the inhibition of scale by silicon-phosphorus crystal is lower than 80 °C, and the fouling rate of FOF is kept at a high level under the working environment of below 120 °C.